Description
Overview
Washers distribute load, protect mating surfaces, improve seating and support locking or sealing depending on the washer type. The correct washer should match the fastener diameter and the joint function.
This selected size is specified with diameter M24, thread M24.
Sold in multiples of '100 pieces. 1 Box = '100 pieces.
Material, Grade & Strength
Mild steel is an economical carbon steel option for general purpose fastening where high tensile strength is not required.
Finish & Corrosion Protection
Zinc plating provides economical sacrificial corrosion protection for indoor and general industrial service.
Typical Uses
Washers are used under bolt heads and nuts to spread load, protect surfaces, improve seating and provide locking or sealing support depending on the washer type.
Technical Tips
- Match the washer inside diameter to the fastener size.
- Use flat washers for load spreading and surface protection.
- Use spring, toothed or lock washers only where their locking function is appropriate.
- Use bonded washers where sealing against water ingress is required.
Selection Advice
Select the product by matching the thread, size, material, finish and function to the assembly. Avoid choosing only by appearance or a partial part number.
Dimensions – DIN 6916 / ISO 7416 M24
| Standard | DIN 6916 / ISO 7416 |
|---|---|
| Product | Hardened structural washer (HV 300-370) |
| Nominal size | M24 |
| Inside diameter (d1) | 25 mm |
| Outside diameter (d2) | 44 mm |
| Thickness (h) | 4 mm |
| Weight (calculated) | 32.33 kg per 1 000 pieces |
Material, Grade & Strength
| Material | High tensile steel, property class 8.8 |
|---|---|
| Hardness | 300-370 HV (through hardened) |
Finish & Corrosion Protection
Zinc plated (clear/blue passivated): Electroplated zinc, typically 5-8 um (ISO 4042). Economical protection for dry indoor and light outdoor use; white rust in neutral salt spray typically from ~24-72 h depending on passivate.
DIN 6916 data sheet – all sizes
| Size | Nominal size | Inside diameter (d1) | Outside diameter (d2) | Thickness (h) |
|---|---|---|---|---|
| M12 | M12 | 13 mm | 24 mm | 3 mm |
| M16 | M16 | 17 mm | 30 mm | 4 mm |
| M20 | M20 | 21 mm | 37 mm | 4 mm |
| M22 | M22 | 23 mm | 39 mm | 4 mm |
| M24 | M24 | 25 mm | 44 mm | 4 mm |
| M27 | M27 | 28 mm | 50 mm | 5 mm |
| M30 | M30 | 31 mm | 56 mm | 5 mm |
| M36 | M36 | 37 mm | 66 mm | 6 mm |
Nominal dimensions per DIN 6916 / ISO 7416. Weights are calculated from nominal dimensions and are a guide only (±10%). Values for fit and strength should be confirmed against the standard for critical applications.
Specifications
| Measurement Type | Metric |
|---|---|
| Thread Size | M24 |
| Inner Diameter | 25 |
| Outer Diameter | 44 |
| Diameter | M24 |
| Thickness | 4 |
| Material | Mild Steel |
| Finish | Zinc Plated |
| Grade | Grade 4.8 |
| Standards Met | DIN 6916 |
| Package Quantity | 100 |
| Package Type | Box |