Description
Overview
DIN85 defines the dimensional requirements for slotted pan head machine screws, ensuring consistent selection and installation in mechanical assemblies.
This selected size is specified with diameter M3, length 6 mm, thread M3, pitch 0.5 mm.
Sold in multiples of '200 pieces. 1 Box = '200 pieces.
Material, Grade & Strength
A2 (304) stainless steel provides good general corrosion resistance for outdoor and clean industrial environments.
Finish & Corrosion Protection
Match the finish to the operating environment and corrosion exposure.
Typical Uses
Commonly used in electrical equipment, panels, covers, light machinery, fixtures and general workshop assemblies.
Technical Tips
- Use the correct screwdriver or drive bit to prevent head damage.
- Match the thread size with the tapped hole or mating nut.
- Use washers where load spreading or surface protection is required.
Selection Advice
Confirm the standard, size, material, finish and drive style before ordering to ensure compatibility with the assembly.
Dimensions – DIN 85 / ISO 1580 M3 x 6
| Standard | DIN 85 / ISO 1580 |
|---|---|
| Product | Slotted pan head machine screw |
| Thread | M3 x 0.5 |
| Length (l) | 6 mm |
| Head diameter (dk) | 6 mm |
| Head height (k) | 1.8 mm |
| Drive | Slotted |
| Weight (calculated) | 0.59 kg per 1 000 pieces |
Material, Grade & Strength
| Material | Stainless steel A2 (304) |
|---|---|
| Steel grade | AISI 304 (1.4301) |
| Composition | C max 0.07%, Cr 17.5-19.5%, Ni 8.0-10.5% |
| Property class | A2-70 (ISO 3506) unless marked -80 |
| Tensile strength Rm (min) | 700 MPa (class 70), 800 MPa (class 80) |
| Yield Rp0.2 (min) | 450 MPa (class 70), 600 MPa (class 80) |
| Typical use | general corrosion resistance, indoor/outdoor, food equipment |
Finish & Corrosion Protection
Plain / self colour: No applied coating. Stainless, brass and nylon parts are supplied plain; plain steel parts need oil, paint or protected environments.
DIN 85 data sheet – all sizes
| Size | Thread | Head diameter (dk) | Head height (k) | Drive |
|---|---|---|---|---|
| M2 | M2 x 0.4 | 4 mm | 1.2 mm | Slotted |
| M2.5 | M2.5 x 0.45 | 5 mm | 1.5 mm | Slotted |
| M3 | M3 x 0.5 | 6 mm | 1.8 mm | Slotted |
| M3.5 | M3.5 x 0.6 | 7 mm | 2.1 mm | Slotted |
| M4 | M4 x 0.7 | 8 mm | 2.4 mm | Slotted |
| M5 | M5 x 0.8 | 10 mm | 3 mm | Slotted |
| M6 | M6 x 1 | 12 mm | 3.6 mm | Slotted |
| M8 | M8 x 1.25 | 16 mm | 4.8 mm | Slotted |
| M10 | M10 x 1.5 | 20 mm | 6 mm | Slotted |
Nominal dimensions per DIN 85 / ISO 1580. Weights are calculated from nominal dimensions and are a guide only (±10%). Values for fit and strength should be confirmed against the standard for critical applications.
Specifications
| Measurement Type | Metric |
|---|---|
| Thread Size | M3 |
| Thread Pitch | 0.5 mm |
| Thread Style | Fully Thread |
| Drive Type | Slotted |
| Head Style | Pan |
| Diameter | M3 |
| Length | 6 mm |
| Material | Stainless Steel |
| Finish | Stainless steel |
| Grade | Grade (A2) |
| Standards Met | DIN 85 |
| Package Quantity | 200 |
| Package Type | Box |