Description
Overview
Nuts provide the internal thread in a bolted joint. The nut must match the bolt or threaded rod size, pitch, material compatibility and required strength class.
This selected size is specified with length 3/4 in.
Sold in multiples of '1 pieces. 1 Box = '1 pieces.
Material, Grade & Strength
A2 / 304 stainless steel provides good general corrosion resistance for outdoor, clean industrial and food-related applications. Use anti-seize where stainless thread galling is a concern.
Finish & Corrosion Protection
Stainless products rely on the corrosion resistance of the stainless material rather than a separate plated coating.
Typical Uses
Nuts are used with bolts, set screws, studs and threaded rod to create clamped joints that can be assembled, adjusted and serviced.
Technical Tips
- Match the nut thread size and pitch to the mating fastener.
- Use a compatible property class for high tensile bolts.
- Use locking nuts or thread locking methods where vibration is present.
- Use anti-seize on stainless-on-stainless assemblies where galling is a risk.
Selection Advice
Select the product by matching the thread, size, material, finish and function to the assembly. Avoid choosing only by appearance or a partial part number.
Dimensions – ASME B18.2.2 3/4 BSW
| Standard | ASME B18.2.2 |
|---|---|
| Product | Finished hexagon nut, inch series |
| Thread | 3/4-10 BSW |
| Across flats (s) | 1 1/8 in (28.6 mm) |
| Height (m) | 41/64 in (16.3 mm) |
| Weight (calculated) | 59.06 kg per 1 000 pieces |
Material, Grade & Strength
| Material | Stainless steel A2 (304) |
|---|---|
| Steel grade | AISI 304 (1.4301) |
| Composition | C max 0.07%, Cr 17.5-19.5%, Ni 8.0-10.5% |
| Property class | A2-70 (ISO 3506) unless marked -80 |
| Tensile strength Rm (min) | 700 MPa (class 70), 800 MPa (class 80) |
| Yield Rp0.2 (min) | 450 MPa (class 70), 600 MPa (class 80) |
| Typical use | general corrosion resistance, indoor/outdoor, food equipment |
Finish & Corrosion Protection
Plain / self colour: No applied coating. Stainless, brass and nylon parts are supplied plain; plain steel parts need oil, paint or protected environments.
Nominal dimensions per ASME B18.2.2. Weights are calculated from nominal dimensions and are a guide only (±10%). Values for fit and strength should be confirmed against the standard for critical applications.
Specifications
| Measurement Type | Inch |
|---|---|
| Thread Type | BSW |
| Drive Type | External Hex |
| Length | 3/4 in |
| Material | Stainless Steel |
| Finish | Stainless steel |
| Grade | Grade (A2) |
| Package Quantity | 1 |
| Package Type | Box |